How to maintain the rotary reducer of a small rotary drilling rig

Since we are in the rotary drilling rig business, we must know every part of the rotary drilling rig so that we can determine the cause of the failure and solve the problem as soon as the rotary drilling rig fails. The rotary reducer of the rotary drilling rig is a part of the rotary mechanism, and it is also very important for the rotary drilling machine. This article will share with you the maintenance of the rotary reducer.

The maintenance work of the rotary reducer of the rotary excavator is mainly to check and replace the lubricating oil. The dipstick is located on the slewing device behind the boom base. Take out and check the dipstick. Keep the oil level between the top of the dipstick and the mark on the dipstick. If necessary, add oil through the dipstick tube, and finally insert the dipstick. To replace the lubricating oil of the rotary reducer of the rotary excavator, first remove the inspection cover located under the rotary reducer, remove the oil drain pipe from the holder on the upper frame, and make the hose end face the container, and use the extension with sleeve Use the universal joint to loosen the drain valve in the hole, drain the oil into a suitable container, tighten the drain valve, hang the drain pipe on the holder, make sure the hose end is facing up, remove the dipstick, and pass the oil Fill the dipstick tube with a certain amount of oil, and keep the oil level between the top of the dipstick and the mark on the dipstick.

Regarding the maintenance of the rotary reducer of the small rotary drilling rig, as mentioned above, when you maintain the rotary mechanism of the small rotary drilling rig in the future, don't forget to maintain the rotary reducer in accordance with the above content.

What is the difference between a rotary drilling rig and a rotary drilling rig

The scope of application of the rotary excavator and the shortcomings in the construction

Domestic status of rotary drilling rigs and market influencing factors

About the classification and application of rotary drilling rigs